4X CAPITAL™ 1-Step qRT-PCR Probe Master Mix

CAPITAL qPCR Probe Mix (1step) (Composition: Optimized 4X qPCR Probe Master Mix for One Step qRT-PCR) LROX / HROX mixes (Composition: ROX incorporated in the mix in low / high concentration ) RTase with RNase Inhibitor (Composition: Proprietary 20X Reverse transcriptase in a mix with efficient Ribonuclease Inhibitor)

Mix tested functionally in QRT-PCR.

When assembling the amplification reactions, care should be taken to eliminate the possibility of contamination with undesired DNA. Use separate clean areas for preparation of samples and reaction mixtures and for cycling. Wear fresh gloves. Use sterile tubes and pipette tips with aerosol filters for PCR setup. Use only water and reagents that are free of DNA and nucleases. With every PCR setup, perform a contamination control reaction that does not include template DNA.

Keep the master mix protected from light until you use it. Aliquot the master mix to minimize freeze-thaw cycles and light exposure. Thaw on ice and mix very well all reagents. Assemble and keep all reactions on ice. Use only high quality optically clear reaction plates and seals designed for fluorescence applications. Do not use corner wells or use a more robust seal. Reserve plate positions for positive (control DNA) and negative (water or buffer) controls. First pipette the primer mixture, then add the template and last the Master Mix. Before preparing mixes, calculate the volume needed according to the reaction number plus one extra. To have a better correlation, run the reactions in triplets.

Step: Initial activation (Temperature: 95°C ; Time: 2-3 min ; Cycles: 1) Step: Denaturation (Temperature: 95°C ; Time: 10–15 s ; Cycles: 40–45) Step: Annealing/Extension* (Temperature: (60-68°C) ; Time: 30 s ; Cycles: ) *Recommended annealing/extension temperature is primer Tm +2°C. Use gradient PCR to optimize the annealing temperature. Do not use temperatures below 60°C. Do not exceed 30 seconds. For melt analysis refer to instrument instructions.

Real-Time PCR

CAPITAL One Step qRT-PCR

Germany

One step qRT-PCR from mRNA, total RNA and viral RNA targets For use with standard and fast qPCR platforms Single and multiplex qRT-PCR reactions

For laboratory research and development purposes only.

All biotechrabbit products are designed for use for research purposes only (RUO). biotechrabbit does not assume any warranty regarding the design, merchantability or fitness for a particular purpose of the product, especially, but not limited to, for any in vitro diagnostic usages of the products. It is the sole responsibility of the customer to obtain the required approvals for any uses from the competent authorities or notified bodies. The product is not suitable for administration to humans or animals. biotechrabbit products are to be used by trained laboratory personnel who are familiar with laboratories equipped to perform life science research. biotechrabbit products may contain chemicals which are harmful if misused. Due care should be taken with all products to avoid direct contact with components that are potentially harmful. biotechrabbit is not responsible for injury or damages resulting from the use or misuse of any of its products.The customer shall respect restrictions of the local law. The Customer is responsible for requesting and adhering to information provided in product material safety data sheet (MSDS) pertaining to any product hazards which may exist.

482400 mm3

67 mm

144 mm

50 mm

EN ISO 13485 for the scope of design and development, production, marketing and distribution of molecular biology products, proteins and reagents for in-vitro diagnostics. EN ISO 9001 for the scope of design and development, production, marketing and distribution of molecular biology products, proteins and reagents. biotechrabbit has always been committed to highest quality standards for development, production and quality control. The ISO 13495 and ISO 9001 certifications validate to our customers that biotechrabbit products are manufactured and distributed according to these high quality levels. The ISO 13485 certification was driven by our relationships to in-vitro diagnostics companies who are using biotechrabbit enzymes and reagents to manufacture diagnostic test kits. The quality management according to ISO 9001 covers the broader product range of our portfolio, assuring end customers and distribution partners our reliable and effective quality processes.

Component: Primer Mix (Reverse and Forward) (Volume: Variable ; Final concentration: 100–400 nM) Note: Too high primer concentrations result in unspecific amplification and should be avoided. Component: Specific Probe (Volume: Variable ; Final concentration: 200 nM) Component: Template RNA (Volume: Variable ; Final concentration: 0.01 pg to 1 µg) Note: Use 1 pg – 1 µg Total RNA, or >0.01 pg mRNA Component: 4X CAPITAL qPCR Probe Mix (1step) (Volume: 5 µl ; Final concentration: 1×) Component: 20X RTase with RNase Inhibitor (Volume: 1 µl ; Final concentration: 1×) Component: Nuclease free water (Volume: Variable ; Final concentration: ) Total volume: 20 µl Gently mix the reactions without creating bubbles (do not vortex). Bubbles will interfere with fluorescence detection. Place the reaction into the PCR cycler.

Yes